English 
 |
| Quantity: | |
|---|---|
Speed
poly tanks and Industrial/Sanitary/BioPharma metal and stainless mixing vessels.
FDA Resin White Translucent PE tanks offer very good chemical resistance and stress-crack resistance. The operating temperature is from 140 F (60 C) down to -94 F (70 C). HDPE has good impact resistance and can be used for sanitary conditions. These tanks are typically used for caustics, metal finishing, plating and brine. Strong oxidizing agents, aromatic hydrocarbons and solvents should be avoided. PE we offer is an FDA approved resin.
PE tanks are often used for ultra pure water storage where ozone is used for sterilization and has a general acid and alkaline solution.
USP VI Resin White
Autoclaveable
Non Cytotoxic, USP VI and FDA 21 CFR177.1520
PP tanks offer very good chemical resistance and excellent stress-crack resistance. Its operating temperature is from 220 F (104 C) down to 32 F (0 C). It only has a fair impact resistance and can be used for sanitary applications. PP mixing tanks are good for many organic chemicals and etching chemicals. Strong oxidizing agents and aromatic or chlorinated hydrocarbons should be avoided.
We can also provide other materials, but some are expensive and may not be particularly cost-effective. Have specific requirements can contact us in time
poly tanks and Industrial/Sanitary/BioPharma metal and stainless mixing vessels.
FDA Resin White Translucent PE tanks offer very good chemical resistance and stress-crack resistance. The operating temperature is from 140 F (60 C) down to -94 F (70 C). HDPE has good impact resistance and can be used for sanitary conditions. These tanks are typically used for caustics, metal finishing, plating and brine. Strong oxidizing agents, aromatic hydrocarbons and solvents should be avoided. PE we offer is an FDA approved resin.
PE tanks are often used for ultra pure water storage where ozone is used for sterilization and has a general acid and alkaline solution.
USP VI Resin White
Autoclaveable
Non Cytotoxic, USP VI and FDA 21 CFR177.1520
PP tanks offer very good chemical resistance and excellent stress-crack resistance. Its operating temperature is from 220 F (104 C) down to 32 F (0 C). It only has a fair impact resistance and can be used for sanitary applications. PP mixing tanks are good for many organic chemicals and etching chemicals. Strong oxidizing agents and aromatic or chlorinated hydrocarbons should be avoided.
We can also provide other materials, but some are expensive and may not be particularly cost-effective. Have specific requirements can contact us in time
