| Availability: | |
|---|---|
| Quantity: | |
DN150
Speed
DN150 | Easy-Clean Design | Removable Rotor | Lithium Battery Material Handling
The SPEED Quick Release Nylon Rotary Airlock Valve is designed for controlled discharge of powder and bulk materials in applications requiring convenient cleaning and material changeover.
Featuring a nylon-based housing construction, a removable rotor and a quick-access end-cover design, this rotary valve allows operators to access internal material-contact surfaces for inspection and cleaning.
It is designed for lithium battery material handling and other suitable powder processing applications where material compatibility, cleanliness and maintenance accessibility are important.
Key Benefits
Quick-release rotor design for easier inspection and cleaning.
MC nylon, PA66 or modified nylon housing options.
Nylon rotor combined with 304 stainless steel components.
Labyrinth gas seal and FKM rotary shaft seal.
Copper-free and zinc-free design, as specified.
Customizable drive configuration according to operating requirements.
Model: DN150
Contact SPEED for technical specifications and customization.
The removable rotor structure provides convenient access to the internal chamber and material-contact surfaces. Operators can open the end cover and withdraw the rotor for inspection, cleaning and maintenance.
The valve housing is available in MC nylon, PA66 or modified nylon, depending on the application requirements. This construction is intended for material handling processes where a nylon-based contact surface is preferred.
The rotor is constructed from MC nylon combined with 304 stainless steel components. The configuration is designed to meet the mechanical and material-handling requirements of the application.
The valve incorporates a labyrinth gas seal and a fluororubber (FKM) rotary shaft seal to support sealing performance during operation.
The product is specified with a copper-free and zinc-free configuration. This feature can be considered in applications where these materials need to be excluded from the equipment construction.
The valve uses a direct-drive arrangement. A cycloidal pin-wheel reducer and Y-series motor can be configured according to customer requirements.
| Parameter | Specification |
|---|---|
| Product Type | Quick Release Nylon Rotary Airlock Valve |
| Model | DN150 |
| Housing Material | MC Nylon / PA66 / Modified Nylon |
| Rotor Material | MC Nylon with 304 Stainless Steel Components |
| Rotor Design | Open-Type or Closed-Type (Subject to Configuration) |
| Rotor-to-Housing Clearance | 0.6 mm |
| Shaft Seal | Labyrinth Gas Seal + FKM Rotary Shaft Seal |
| End Cover | 304 Stainless Steel with Internal Nylon Lining |
| Bearing Protection | Oil Seals |
| Drive Configuration | Direct Drive |
| Reducer | Cycloidal Pin-Wheel Reducer |
| Motor | Y-Series Motor or Customized |
| Design Features | Removable Rotor, Quick-Release Cleaning Design |
| Nominal Size | DN150 |
Note: Final specifications, material grades, drive configuration and dimensions should be confirmed according to the approved technical drawing and customer operating conditions.
Rotary Airlock Designed for Abrasive Material
The Quick Release Nylon Rotary Airlock Valve is designed for powder and bulk material discharge applications where easy access for inspection and cleaning is required.
Suitable for evaluating and integrating into powder handling processes involving lithium battery materials, including:
Lithium Iron Phosphate (LFP) materials.
Cathode material powders.
Other compatible battery production materials.
For suitable powder discharge and material transfer applications in chemical processing systems.
For selected processes requiring convenient equipment disassembly, inspection and cleaning. Final material compatibility and applicable hygiene requirements must be evaluated before selection.
Can be considered for installation beneath hoppers, silos and other powder storage or feeding equipment, subject to system design and operating conditions.
The rotary airlock valve uses a rotating impeller to transfer bulk material from the upper inlet to the lower outlet.
As the rotor turns, material enters the rotor pockets and is carried toward the discharge opening. The rotating structure supports controlled material discharge while helping maintain the pressure separation required by the conveying system, within the valve's rated operating conditions.
The removable rotor design provides access to internal material-contact surfaces for cleaning and inspection.
Step 1 – Release the Securing Bolts
Loosen the designated securing bolts according to the maintenance instructions.
Step 2 – Open the End Cover
Open the side end-cover assembly to access the rotor.
Step 3 – Remove the Rotor
Withdraw the rotor carefully for inspection and cleaning.
Step 4 – Clean and Inspect
Clean the accessible material-contact surfaces and inspect relevant components according to the approved cleaning procedure.
Step 5 – Reinstall the Rotor
Reinstall the rotor, close the end cover and tighten all securing components to the specified requirements.
Important: The equipment must be isolated from the power supply and process system, depressurized and made safe before disassembly. Follow the manufacturer's maintenance and safety instructions.
A quick-release nylon rotary airlock valve is a rotary feeding and discharge device featuring a nylon-based housing and a removable rotor structure. It is designed to simplify internal inspection, cleaning and maintenance in suitable powder handling applications.
The housing can be manufactured from MC nylon, PA66 or modified nylon. The rotor combines MC nylon with 304 stainless steel components. The end cover is made of 304 stainless steel with an internal nylon lining.
The removable rotor allows operators to access internal material-contact surfaces more conveniently. This helps simplify inspection, cleaning and maintenance, especially when production processes involve material changeovers.
The specified rotor-to-housing clearance for this configuration is 0.6 mm. Final tolerances should be confirmed against the approved product drawing.
The valve is designed for consideration in lithium battery material handling applications, including compatible cathode and LFP powders. Final suitability depends on material properties, operating conditions and chemical compatibility with all wetted components.
Yes. The drive configuration can be discussed according to the required capacity, operating speed, installation conditions and customer specifications.
SPEED can review application requirements and discuss suitable material, dimensions, drive configuration and other design options. Please provide your process conditions and technical requirements for evaluation.
The main information includes material type, bulk density, required throughput, operating temperature, differential pressure, inlet and outlet dimensions, installation conditions and drive requirements.
Contact SPEED with your required model, material information, operating conditions and quantity. The engineering and sales teams can review the requirements and provide a suitable quotation.

ALT: Quick Release Nylon Rotary Airlock Valve DN150

ALT: Nylon Rotary Valve Removable Rotor

ALT: Quick Release Rotary Valve Disassembly

ALT: SPEED Rotary Airlock Valve Manufacturing
